Do you want to add a concrete effect coffee table to your living space? Perhaps you should learn about microcement and how to apply it. Microcement, in brief, is a type of concrete-based coating that’s suitable for decorative applications. It has a fine texture and can be used on all kinds of surfaces. Examples are wood and tile.
Microcement Application Guide
If you want to apply microcement like a champion, you should follow this guide carefully.
One – Make Sure You Have All of the Essential Supplies
It’s not only crucial to make sure that you’re equipped with the coating itself. You also have to round up fiberglass mesh, primer, rollers, preparatory microcement, Topsealer, a spatula and a trowel.
Two – Get the Surface Ready
It’s imperative to see to it that the surface is totally devoid of grease and dust. It has to be fully dry and even as well. Condition the surface. Lay down the fiberglass mesh. Once you’re done with those things, you can proceed to put on the primer. If you don’t have primer, adhesion promoter application can also work like a charm.
Three – Put on the Preparatory Microcement
Apply a couple of coats of preparatory microcement onto the fiberglass mesh. This fiberglass mesh is going to function as a reliable substrate for the upcoming finishing microcement.
Four – Put on the Finishing Microcement
After the base microcement has been applied, you’re ready to go forward with the finishing microcement. Put a couple of coats of this on. This is the microcement that introduces the specific color and texture that you want when all is said and done. Once you apply this thoroughly and neatly, you’ll be able to see how the microcement will ultimately look.
Five – Protect Your Microcement
It’s critical to safeguard your microcement from future damage. You can protect it by applying a couple of coats of presealer. Once you’re done with that, you can truly seal the deal by putting on a couple of coats of Topsealer. Topsealer is a kind of varnish that has the ability to protect surfaces from the development of noticeable and unattractive stains, scrapes, scratches and abrasion. It can protect surfaces from the negative effects of the sun’s rather aggressive UV (ultraviolet) rays, too.
Conclusion – Suggestions That Can Assist You With Microcement Wall and Floor Application
Are you searching for specific suggestions that can assist you with application of microcement onto walls and floors? If you want to apply microcement onto your walls, you should confirm that they’re completely dry first. That’s due to the fact that wall moisture can make microcement rapidly burn off. It can do the same for any varnish as well.
If you want to apply microcement onto your floors, the surfaces have to be devoid of dust, dirt and stains. Don’t forget to protect your flooring from exposure to any amount of water during the microcement application process.
Microcement application can be straightforward for detail-oriented individuals who follow these guidelines carefully.
