6 Easy Tips to Repair Garage Doors

6 Easy Tips to Repair Garage Doors

Garage doors provide curb appeal, increase the value of your property, and provide security to your home, garage doors have a complex system that allows them to do their job quietly in the background.

Garage door openers lead a fairly simple life. Up, down, up, down, over and over, year after year – until suddenly they don’t work the way they should. If there are problems with opening and closing, it may be time to fix them, there are simple ways to solve certain problems, which can save you time and money. 

Check out these 6 garage door repair tips following.

  1. If you’re door won’t go down – check the sensor

One of the main reasons doors stop descending properly is due to sensors. It could be a simple placement problem. Make sure to check the position & location first. You may be able to make a difference by placing it in a lower position. Keep objects away from sensors. Blocking the sensor can be the cause of the door not working properly in many ways.

  1. Garage Door Opener Problems

If you have trouble with the opener or remote, it can be as simple as changing the battery, of course not as complicated as fixing a system that opens a garage door. While replacing the battery is the easiest fix, working on other door machines may be a lot more complicated. If the battery is not the problem, check for a problem with the electricity.

  1. Garage door jammed or difficulty moving

If the door has difficulty moving smoothly – or is stuck completely – the problem is often the result of a bent track or a damaged moving part, such as a pulley. Check wheel paths for obstructions or debris and remove. Lack of lubrication may be another reason your door is sticky, so make sure your regular maintenance routine includes applying lubrication to moving parts.

  1. The garage door does not close completely

In the case of automatic doors, this may be due to a problem with your limit switch. If the garage door hits the ground, but then flips back over, check to see if there are no obstructions in the doorway or obscuring the photo eye sensor. Manual causes can also include damaged cables, bent tracks, or worn components – get Garage Door Repair Raleigh NC professional to diagnose your problem.

  1. Noisy garage doors

Noisy garage doors cause all kinds of problems, especially for anyone who has to sleep above or beside the garage. Fortunately, most noisy garage doors can be repaired with a combination of routine maintenance and replacement of a few parts, the door hinges may need to be replaced, and rollers running on metal tracks can also gradually wear out and become noisy when the bearings stop turning smoothly.

  1. Frozen garage door

It is precisely on those coldest days of the year when you most need and appreciate the convenience of opening and closing your garage door quickly. Sadly, that’s exactly the kind of day when moisture and cold can conspire to make this difficult. Garage doors can and do freeze to the garage floor. Sometimes it is just a minor icy connection between the two that can be broken when you hit the opener button.

But if the door refuses to budge on the first attempt, resist the urge to keep banging on the automatic opener button. This is likely to cause a more serious problem with the garage door opener—including, but not limited to, stripped gears, broken springs, and a burned-out motor on the opener.

Instead, try other methods that might break the frozen connection between the door and the floor. For example, you can use a heat gun or hair dryer to melt the ice and free the door. Standard de-icing products can also work. And if you are careful not to damage the door or the seal on the bottom of the door, you can use a flat shovel or similar tool to chip away at the ice.

Once you get the door open, clear away any water, ice, or snow from the floor beneath the garage door. Keeping this area dry will prevent future freezing.

Share this post

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *